Zanussi Door Seal Fix. Zanussi 1250. WJS 1397W. TurboDry. Jetsystem Excel. RSI, Rinse Sensor Injection

These pages are about how to fit the door seal on a Zanussi 1250. WJS 1397W. TurboDry

Zanussi 1250. WJS 1397W. TurboDry. Jetsystem Excel. RSI, Rinse Sensor Injection Zanussi Main Identification Model Numbers
Zanussi 1250. WJS 1397W.  TurboDry. Jetsystem Excel. RSI, Rinse Sensor Injection Main Identification Model Numbers

IF YOUR APPLIANCE IS UNDER GUARANTEE YOU SHOULD CONTACT THE MANUFACTURER’S SERVICE DEPARTMENT FIRST. DO NOT ATTEMPT TO CARRY OUT ANY REPAIRS AS THIS MAY VOID ANY GUARANTEE'S AND/OR WARRANTIES and also result in you having to pay a higher amount. 

ELECTROLUX. TROUBLESHOOTING GUIDE. CHECK THIS FIRST TO SEE IF THEY'RE OTHER ISSUES THAT MAY BE CAUSING ANY PROBLEMS.

I can not accept any liability for injury or damage. These pages are for information only.

 The Machine above had these indentation numbers behind the door; Product No. 91463950300    Type P6297753    Serial No. 931 00518

There are more Identification Numbers just behind the door.

These Tips may not be suitable for any other Models of Washing Machines or Washer Dryers.

Before you start make sure you are competent enough to complete these tips.

You will be handling HEAVY MACHINEY WHICH USES HIGH VOLTAGE, HIGH PRESSURE WATER, DANGEROUS, (POTENTIALLY HOT AND HIGH SPEED), MECHANICAL ITEMS and TOOLS.

ELECTRIC AND WATER DO NOT MIX and this with the HEAVY and MECHANICAL DEVICES MAKE THIS VERY, VERY DANGEROUS.

IF YOU HAVE ANY DOUBTS, ASK A PROFESSIONAL. 

Read ALL TIP's completely and make sure you have the tools and replacement parts ready.

DANGER OF ELECTROCUTION

DANGER HIGH VOLTAGE.  TURN OFF MAINS ELECTRIC SUPPLY AND UNPLUG FROM THE MAIN SUPPLY.

DO NOT CONTINUE UNTIL YOU HAVE DONE THIS.  DANGER UNPLUG.  Also turn off water supply.

TRIPLE CHECK!!!

DANGER HIGH VOLTAGE. TURN OFF MAINS ELECTRIC SUPPLY AND UNPLUG FROM THE MAIN SUPPLY.

DANGER OF ELECTROCUTION

DANGER HIGH VOLTAGE

TURN OFF MAIN SUPPLY AND UNPLUG

DANGER UNPLUG.
Also turn off water supply.

DANGER HIGH VOLTAGE.  TURN OFF MAINS ELECTRIC SUPPLY AND UNPLUG FROM THE MAIN SUPPLY.

DO NOT CONTINUE UNTIL YOU HAVE DONE THIS.

TRIPLE CHECK!!!

DANGER UNPLUG.  Also turn off water supply.

I can not accept any liability for injury or damage. These pages are for information only.

THESE INSTRUCTIONS AND TIPS ARE FOR GUIDANCE ONLY.

DANGER OF ELECTROCUTION

DANGER HIGH VOLTAGE.  TURN OFF MAINS ELECTRIC SUPPLY AND UNPLUG FROM THE MAIN SUPPLY.

DO NOT CONTINUE UNTIL YOU HAVE DONE THIS.  DANGER UNPLUG.  Also turn off water supply.

NOTE: ALLOW THE WASHING MACHINE TO COOL COMPLETELY BEFORE STARTING. The machine can become very HOT during use, especially if the tumble dryer is used.

TIP you should, if possible, empty the washer dryer of clothes and water first i.e. use the spin cycle.

TIP Take your time if any part feel difficult to fit find out why. Do NOT force parts this may cause damage.

These Tips may not be suitable for any other Models of Washing Machines or Washer Dryers.

Before you start make sure you are competent enough to complete these tips.

You will be handling HEAVY MACHINEY WHICH USES HIGH VOLTAGE, HIGH PRESSURE WATER, DANGEROUS, (POTENTIALLY HOT AND HIGH SPEED), MECHANICAL ITEMS and TOOLS.

ELECTRIC AND WATER DO NOT MIX and this with the HEAVY and MECHANICAL DEVICES MAKE THIS VERY, VERY DANGEROUS.

THESE ACTIONS REQUIRE AT LEAST TWO STRONG PEOPLE WHO ARE ABLE TO ACT IN A RESPONSABLE WAY.

HAVE A FIRST AID KIT READY.

IF YOU HAVE ANY DOUBTS, ASK A PROFESSIONAL. 

Read ALL TIP's completely and make sure you have the tools and replacement parts ready.

 

  1. DANGER NOTICE
  2. DANGER UNPLUG *** A MUST DO ***
  3. Turn off water supply
  4. The New Door Seal
  5. Disconnect the Pipes
  1. Remove the Lid
  2. Removing the Panels
  3. Removing Old Door Seal
  4. Fit New Door Seal

DANGER UNPLUG.  Also turn off water supply. (Yes, I warn you again!!!)

Once the New Door Seal has been fitted follow the reverse actions (Tip Note the Panels need to be slid into slots when refitting),  to reassemble.

Tip Note the Panels need to be slid into slots when refitting.

Take care not to force fittings.

TRIPLE CHECK ALL PIPES, CONNECTIONS, FITTINGS, WATER SUPPLY, WASTE CONNECTION and POWER SUPPLY.

MAKE SURE YOU HAVE REMEMBER TO RECONNECT THE EARTH WIRE TO THE HEATER DUCT!!!

Test that everything functions as expected.

TIP Try without cloths first. Check for leaks.

I can not accept any liability for injury or damage. These pages are for information only.

THESE INSTRUCTIONS AND TIPS ARE FOR GUIDANCE ONLY.

NOTE: ALLOW THE WASHING MACHINE TO COOL COMPLETELY BEFORE STARTING.

TIP you should, if possible, empty the washer dryer of clothes and water first i.e. use the spin cycle.

TIP Take your time if any part feel difficult to fit find out why. Do NOT force parts this may cause damage.

These Tips may not be suitable for any other Models of Washing Machines or Washer Dryers.

Before you start make sure you are competent enough to complete these tips.

You will be handling HEAVY, HIGH VOLTAGE, HIGH PRESSURE WATER and DANGEROUS MECHANICAL ITEMS and TOOLS.

ELECTRIC AND WATER DO NOT MIX and this with the HEAVY and MECHANICAL DEVICES MAKE THIS VERY, VERY DANGEROUS.

IF YOU HAVE ANY DOUBTS, ASK A PROFESSIONAL. 

Read ALL TIP's completely and make sure you have the tools and replacement parts ready.

Here are some pictures of my old damaged Zanussi door seal.

So far as I am aware Zanussi has been taken over by Eectrolux.

Zanussi Website

Eectrolux Website

Service Force Service and Spares Locate your nearest Zanussi-Electrolux spares and service provider, or to download product manuals. Service Force are the authorised UK domestic appliance repair organisation and spare parts provider for the Electrolux Group. And with over 80 Service Centres nationwide, there's sure to be one local to you. If your appliance is under guarantee you should contact the manufacturers service department first. Service Force carry out under guarantee repairs for, AEG, Electrolux, Parkinson Cowan, Tricity Bendix, and Zanussi appliances.

These pages only refer to the Zanussi 1250. WJS 1397W. TurboDry. Jetsystem Excel. RSI, Rinse Sensor Injection.

Please Help support A Great Portal with a donation. If you find the Zanussi 1250. WJS 1397W. TurboDry Door Fix Tips useful.

Click for A Great Portal